Crappie fishing :Where Are The Best Place To Catch Crappie?
Old School Crappie Fishing Family Secrets
Crappie fishing is a great way to break into the sport of fishing but you do need to know where to find them. I have identified some sure fire crappie catching locations that always seem to hold a good population of crappie. I think this information will help you on your next fishing trip for crappies, regardless if you are a beginner or an experienced angler.
#1 Savvy crappie fisherman who fish from a boat figured out years ago that if you follow the Threadfhin Shad ( Dorosoma petenense ) schools you will find the big slab crappie. Unfortunately these small little crappie bait fish do not habitat through out the entire crappies habitat range, but if you happen to live in any states that are west of the Appalachian mountains , north to Kentucky, west to East Texas, south to the Rio Grand drainage, and east to Florida. You are in luck. Also California and Arizona have introduced the Threadfin Shad to there large Lake and reservoir systems. These little critters typically like noticeable current and stay primarily in the upper five feet of the waters they frequent. Tip: Set all you crappie fishing rigs between the depths of 2 to five feet until your baits are at the same depths as the shad schools. This is where the large crappies will come up to feed.
#2 Look for small ponds and water impoundments that are adjacent to main bodies if water that have a defined access to the main watershed area. These area are the prime feeding grounds for hungry crappie. When you find these areas look for isolated stumps, and sunken trees, also fish around the perimeter of this area, and any significant drop off in depth may hold crappie.
#3 One of the best and easiest crappie fishing locations to find is a isolated stump or sunken tree. You should never pass up one of these areas if you are fishing from the bank or fishing from a boat, because these areas always hold a good population of crappie.
#4 If you live in the south never pass up Cypress trees because they will definitely hold good populations of crappie sometime during the year. These areas are very productive for catching crappie. In the spring time fish the cypress located in shallow shoreline areas. In the winter and summer fish the cypress trees that are located near deeper water, where the crappie have a easy access to the deeper water.
#5 Don’t overlook man made fish shelters and attractors. Check with your local state department of natural resources to find maps to these areas. Well folks Good Luck on your next crappie catching outing! Remember to use this crappie fishing information to your advantage and may you have many productive days of fishing.
Mark Fleagle is an Expert Author At Ezinearticles.com. and has over 30 years of fishing experience who has written 100’s of useful fishing articles. Would you like to max out your catch on your next fishing trip? Blow your fishing buddies out of the water and get your bragging rights today! Also don’t forget to get your free copy of “78 Fishing Discoveries Unleashed” http://www.oldfishinghole.com
Click Here For More Information About crappie fishing
The Crappie Minnow school: Amazing Special Minnow fishing Techniques
Old School Crappie Fishing Family Secrets
Crappie Minnow Setups
Crappies love live bait and they hunt for schools of minnows everyday for a food source. The following minnow rig is designed to imitate a small school of minnows that is intended for a hungry crappie in waiting. This small group of minnows simulates a minnow school and will get any hungry crappie’s attention.
It is very important to have the right fishing equipment when fishing for crappie and just the right rod and reel combo is very important. You will need a small spin cast reel that is rated for 4 to 6lb test line, and a rod that is over 8ft long. (a typical fly rod makes a excellent crappie rod. I personally use a set up that consist of a small spin cast reel that is rated for 6lb test line. The reel is loaded with a braided :fireline that is rated for 10lb test but has a dia. of 4lb test line. My rod is a two piece fly rod 12ft long that I purchased from bass pro shop.
Steps To Success The “Crappie Minnow” Rigging Technique
Step#1 Get yourself (3) three small three way swivels that work for crappie fishing.
Step#2 Get yourself some 3 small spinner blades 6 beads. They make excellent crappie minnow baits.
Step#3 You will need to find some bass or egg sinkers that are 1/4oz. You can find them at any department store fishing tackle area or any local bait shop.
Step#4 Get yourself some 10lb test fire line, this will have the dia. Of 4lb test, now load your spin cast reel.
Step#5 Cut (3) 16” inch pieces of fire line use a Palomar knot to tie on a no1,1/0,2/0 gold Aberdeen crappie hook to each piece of line on one end only. The length needs to end up at approximately 12 inches.
Step#6 Now you are going to cut (3) pieces of fire line each 8” inches long, they will connect between the three way swivels.
Step#7 Release enough fire line out of your rod and reel combo and run it through the eyelets on your rod. Make sure you have enough line extending past the eyelets to work comfortably when you are tying on your crappie fishing rig tackle.
Step#8 Tie on your first 3 way swivel so the eyelet is 90degrees from the top eyelet is on the left hand side.
Step#9 Round up (2) of the beads and (1) of the spinner blades from step five, and slide one bead up the 12” inch leader and then slide on a spinner blade spinner blade. Next slide a second bead up the 12” leader behind the spinner blade. Now tie the end opposite the Aberdeen gold crappie hook. And tie it to the 90deg eyelet that is on the left hand side.
Step#10 Now pick up one of your 8” connecting pieces of fire line and tie one end to last remaining open eyelet of the first three way swivel , then tie the other end to the top eyelet of the second three way swivel, but make sure the open eyelet 90degs from the top is on the right hand side before you tie. When you have completed the tying process you should have approximately 6 inches between the two eyelets.
Step#11 Round up (2) of the beads and (1) of the spinner blades from step five, and slide one bead up the 12” inch leader and then slide on a spinner blade spinner blade. Next slide a second bead up the 12” leader behind the spinner blade. Now tie the end opposite the Aberdeen gold crappie hook. And tie it to the 90deg eyelet that is on the right hand side.
Step#12 Now pick up one of your 8” connecting pieces of fire line and tie one end to last remaining open eyelet of the second three way swivel , then tie the other end to the top eyelet of the third three way swivel, but make sure the open eyelet 90degs from the top is on the right hand side before you tie. When you have completed the tying process you should have approximately 6 inches between the two eyelets.
Step#13 Round up (2) of the beads and (1) of the spinner blades from step five, and slide one bead up the last 12” inch leader and then slide on a spinner blade. Next slide a second bead up the 12” leader behind the spinner blade. Now tie the end opposite the Aberdeen gold crappie hook. And tie it to the 90deg eyelet that is on the right hand side.
Step#14 Now pick up the last 8” connecting pieces of fire line and tie one end to last remaining open eyelet of the Third three way swivel , and the other end to the 1/4oz bass sinker.
Great Job! You have now finished your first live bait crappie fishing rig!
Mark Fleagle is an Expert Author At Ezinearticles.com. and has over 30 years of fishing experience who has written 100’s of useful fishing articles. Would you like to max out your catch on your next fishing trip? Blow your fishing buddies out of the water and get your bragging rights today! Also don’t forget to get your free copy of “78 Fishing Discoveries Unleashed” http://www.oldfishinghole.com
Click Here For More Information About crappie fishing minnows